Spray Foam Polyurethane Systems

Name: Spray Foam Polyurethane Systems
Brand: KIMspray

More Peaceful and Comfortable Environment

Energy saving is one of the most challenging parameters in today’s world. The importance of using new energy sources and energy-friendly materials increases each day. Besides, various precautions are taken and strategies are developed to protect the environment and climate.

Kimpur provides solutions for a better life quality and effective insulation in interior and exterior places through numerous innovative products.

The spray polyurethane foams which are called as SPF briefly are the insulating materials which are sprayed on the surface via spray application method by using high pressure special machinery equipment and transforms into foam form.

Since SPFs reduces the environmental impacts of the buildings by providing high level of energy saving and has become one of the fastest-developed construction insulating materials. It can be used in each point from foundation to the roof at the buildings in addition to the usages for insulation purposes in the following areas.

Usage Areas

Industrial roof insulation
Trapeze sheet and reverse ceiling insulation
Sea vehicles insulation
Animal shelter insulation
Cold storage insulation
Pipe line insulation
Tank – silo insulation
Roof insulation
Terrace insulation
Concrete sheet insulation of building foundation
Interlayer insulation
External facade insulation

One of the main reasons to prefer SPF frequently is that it provides heat insulation to the wide areas in a short time period through spray application. Additionally, it enables the intended surfaces to be insulated and eliminates the heat bridges, which is its distinctive characteristics compared to the other insulation materials.

One of the reasons why it is the first preference for heat insulation in buildings is that SPF is suitable for all roof designs. It can be applied in various thicknesses on the elevation and drainage areas on roofs. It can be easily applied in rough areas such as veined surfaces, entrances, HVAC curves, parapet walls, vents, and skylight, and it also helps prevent water leakage problems.

Kimpur has developed KIMspray^® systems which is a two-component contained insulating material for commercial, residential and industrial applications with the aim of providing a perfect insulation for a peaceful and comfortable environment. KIMspray^® provides perfect insulation for the areas which are difficult to reach such as spaces and corners; and it also provides comfort and efficiency for the residents.

Advantages

It provides energy-saving with new generation blowing agents.
Allow cost efficiency by quick installation
It can be swiftly and easily applied by curing very fast
It can be adhered on numerous surfaces perfectly.
Especially open cell foam provides good sound insulation.

KIMspray® spray foam systems
KIMspray systems	Features	Foam structure	Application density (kg/m³)	Certificate
KIMspray RS 035	Water-based system	Open cell	14-16	–
KIMspray RS 036	In compliance with TS EN ISO 11925-2, CE certificate under TS EN 14315-1:3, Water-based system	Open cell	10-12	REACH
KIMspray RS 041	Water-based system	Open cell	10-12	–
KIMspray RS 042¹	Water-based system	Open cell	15-20	–
KIMspray RS 29-30	Class E fire rating	Closed cell	30-35	–
KIMspray RS 034	In compliance with TS EN ISO 11925-2, CE certificate under TS EN 14315-1:3	Closed cell	30-35	REACH
KIMspray RS 033	–	Closed cell	35-40	REACH
KIMspray RS 030-40	Class E fire rating	Closed cell	40-45	TS EN 13501-1:2019 (E)
KIMspray RS 038	Class E fire rating	Closed cell	30-35	TS EN 13501-1:2019 (E)
KIMspray RS 039	–	Closed cell	25-30	REACH
KIMspray RS 040	–	Closed cell	60-65	–
KIMspray RS 049	–	Closed cell	30-34	–
KIMspray RS 050H	Contains eco-friendly blowing agents	Closed cell	30-34	–
KIMspray RS US 058H	Contains eco-friendly blowing agents, Can be applied at a higher thickness (2–3 inches) per layer	Closed cell	30-34	–
KIMspray RS 054-25	–	Closed cell	25	–

¹ It provides excellent acoustic insulation by filling hard-to-reach areas such as gaps and corners.

KIMspray® physical and technical specifications
Property	Closed cell	Open cell	Standard
Applied density	30-60 kg/m³	8-15 kg/m³	EN 1602
Closed cell content	> 90	< 10	DIN EN 4590
Water absorption	< 2	NA	EN 12087
Thermal conductivity	22-28 mW/mK	30-35 mW/mK	ASTM C 518
Compressive strength	100-400 kPa	NA	ASTM D 1621

KIMspray^® systems are classified into two groups as closed and open cell in terms of their structure. Besides, it presents systems in different densities which will suit to the usage area.

For more detailed information about our systems, you can review our brochure.